Zeb - 147 GTA

[Murcianico gta]

thanks for the info !! If not too much to ask could put a picture of how the springs are placed on the gate, thanks and greetings !!

[zeb]

thanks for the info !! If not too much to ask could put a picture of how the springs are placed on the gate, thanks and greetings !!

Close up on the spring

[Rapanui_GT]

Congratulations on the GTA, I've always thought that black is not as rough as in more striking colors , but your bold GTA is spectacular .

Good luck with it !!

[zeb]

Congratulations on the GTA, I've always thought that black is not as rough as in more striking colors , but your bold GTA is spectacular .

Good luck with it !!

Thank You very much.

Here is some photos from lastest comparison of QV and GTA at polish auto magazine:

[alfagtsport12]

Congratulations on the GTA, I've always thought that black is not as rough as in more striking colors , but your bold GTA is spectacular .

Good luck with it !!

Thank You very much.

Here is some photos from lastest comparison of QV and GTA at polish auto magazine:

very good job

[zeb]

Long time, no see It's almost two years since last post.
Now, i've a little issue witch 19" wheels from 4C.
Anyone know size of minimum front spacer for ET49, 8,5" width rim in 147GTA?

[trichesd]

Nice!!...very nice!!

[opskier]

The problem are the front brakes.....it not only depends on the size of the wheel, the interior design of the rim is important too...

[zeb]

Front brakes are not the problem. Rim is flat from inside. Problem is front suspension pillar.

[zeb]

If anyone need to know, minial spacer:
25mm front
20mm rear

[opskier]

[emoji106] [emoji106] [emoji106] [emoji106] [emoji106]

[zeb]

And the final effect:

[GTAsuiza]

Kurwa mac!!

[opskier]

Nice combo!! Congratulations!!

[zeb]

Some photos are missing. So i leave here one or two
There is recently added: DRLs, black inlet pipes and coilover set.
Front and back are even now